harish krishnamoorthy

University of Houston Indian American engineer Harish Krishnamoorthy is working towards improving radio frequency communication capacity. (uh.edu photo)

An electrical engineer at the University of Houston is creating a roadmap toward that 5G future, using a $1.7 million grant to design and build a system capable of supporting 5G infrastructure.

Harish Krishnamoorthy, assistant professor of electrical and computer engineering, is working on the Department of Defense-funded project with New Edge Signal Solutions, a Massachusetts company that builds high-speed broadband radio frequency systems, according to a university news release.

There are big advantages to 5G networks. In addition to faster speeds, 5G offers greater bandwidth and network capacity, paving the way for a future of driverless cars, connected devices and more high-definition connections for virtual meetings and telemedicine, the release said.

But the rollout in the United States and elsewhere has been stymied by gaps in available technology that could operate at the high frequencies required by 5G, it added.

Krishnamoorthy, whose lab focuses on power electronics, said successful adoption of 5G networks will require adapting software to support the demands.

“But first, we need hardware that is fast enough and capable of supporting 5G,” the Indian American said in the university release.

That’s where he comes in, charged with developing a higher power 5G envelope tracking power supply that can operate with a bandwidth of 100 megahertz or higher; current state-of-the-art envelope bandwidth in commercial applications is about 20 MHz for a peak power of greater than 65 watts, he said.

The higher bandwidth allows 5G systems to offer better speed, resolution and clarity, according to the university.

Envelope tracking is a type of power supply modulation technique that continuously adjusts the converter voltage used by the radio frequency power amplifier in order to keep it running at peak efficiency.

Boosting both frequency and power at the same time is technically challenging, in part because of the excess heat produced. The continuous adjustment via envelop tracking can significantly reduce the amount of waste heat produced by the system, despite the higher power output, it said.

4G systems, by comparison, typically operate on established frequencies at lower peak power and at a lower bandwidth. One hundred MHz is just a starting point for 5G, Krishnamoorthy said in the release.

“Even getting to that point is hard with current technology. We will need to advance power electronics to support that,” he said.

The goal over the five-year life of the project is to exceed 100 MHz at close to 200 watts peak power, the UH release said.

Krishnamoorthy said in the release that the work will proceed in steps, “through the use of better device technologies, paralleling power converters and including a smart error correction technique, without which we would be unable to achieve the efficiency as well as linearity targets of the project.”

(0) comments

Welcome to the discussion.

Keep it Clean. Please avoid obscene, vulgar, lewd, racist or sexually-oriented language.
PLEASE TURN OFF YOUR CAPS LOCK.
Don't Threaten. Threats of harming another person will not be tolerated.
Be Truthful. Don't knowingly lie about anyone or anything.
Be Nice. No racism, sexism or any sort of -ism that is degrading to another person.
Be Proactive. Use the 'Report' link on each comment to let us know of abusive posts.
Share with Us. We'd love to hear eyewitness accounts, the history behind an article.